2022 Citroen Relay 35 L3H2 Eprise Bhdi S/S 2.2L Diesel · LL72 JEJ

The most recent MOT test conducted on 7 January 2026 resulted in a pass, though it included an advisory regarding the front inner tyre being worn close to the legal limit and showing uneven wear on both edges. This indicates that while the vehicle currently meets the minimum legal requirements for roadworthiness, it is entering a period where consumable maintenance is becoming necessary. The absence of major failures in the recent record suggests a stable maintenance trend, but the specific nature of the tyre advisory necessitates a closer inspection of the vehicle's running gear to prevent future mechanical issues. With a recorded mileage of 39,201 miles over approximately four years, the vehicle has averaged roughly 9,800 miles per year. This level of usage is considered typical for a commercial vehicle of this class and suggests a consistent operational profile rather than extreme heavy-duty use or excessive periods of inactivity. This moderate mileage is generally positive, as it implies that major components such as the engine, gearbox, and turbocharger should not be excessively worn, though wear on consumables like brake pads, discs, and suspension components will be commensurate with this distance. The advisory regarding uneven tyre wear is a critical area for your inspection. You should investigate whether this wear is caused by simple tyre pressure issues or more serious underlying problems such as incorrect wheel alignment or tracking. During your test drive, pay close attention to the steering response and listen for any clunking or knocking noises from the front suspension, which could indicate worn bushes, ball joints, or failing dampers. It is also essential to inspect the tyres for any signs of sidewall perishing or cracking due to age, as even with sufficient tread, rubber degradation can compromise safety. Furthermore, you should verify the service history to ensure regular oil and filter changes have been carried out to protect the engine. Check the brake system for any signs of binding calipers or heavily corroded discs, as these can contribute to uneven tyre degradation and increased stopping distances. It is also prudent to inspect the underbody for any signs of premature corrosion and check all fluid levels, including coolant and brake fluid, to ensure no leaks have developed during its period of service.