2012 Vauxhall Antara SE Cdti 4X4 Auto 2.2L Diesel · LP61 AED

The latest MOT test recorded on 7 August 2023 resulted in a pass with no defects noted. The overall maintenance trend appears exceptionally stable, as the vehicle has a remarkably clean history with no recorded advisories or failures across the provided data, aside from a brief failure and immediate rectification in August 2023. This suggests a vehicle that has been kept in a roadworthy condition without recurring mechanical issues or systemic neglect. The recorded mileage of 85,837 miles over approximately 14 years indicates an average annual usage of roughly 6,131 miles. This is a moderate level of use that suggests the vehicle has avoided the excessive wear associated with high-mileage motorway fleets, while remaining active enough to avoid some of the complications found in very low-mileage examples. However, this average may hide periods of standing or a prevalence of short-distance urban journeys, which can lead to carbon buildup in the diesel particulate filter and accelerated wear on the starter motor and battery. As the MOT history is devoid of specific defects, the buyer must focus on age-related degradation and calendar-based maintenance. It is critical to inspect the tyre sidewalls for perishing or hairline cracking, as rubber compounds degrade over time regardless of the remaining tread depth. The service history should be rigorously checked for evidence of timing belt and water pump replacements, as these are critical time-sensitive components on the CDTI engine that can cause total engine failure if neglected. During the test drive, the buyer should evaluate the automatic transmission for smooth gear transitions and ensure the 4x4 system engages and disengages without shuddering or binding during tight manoeuvres. Particular attention should be paid to the brake discs for signs of heavy surface corrosion or pitting, and the pedal feel should be checked for any signs of binding calipers resulting from periods of inactivity. Finally, a physical inspection of the engine bay is necessary to check for hardened rubber seals and fluid leaks, alongside a verification of the 12V battery health.