2017 Honda HR-V 1.5L Petrol · LR17 MMK

The most recent MOT examination conducted in March 2026 resulted in a pass with no recorded defects. Looking at the historical data, the maintenance trend for this Honda HR-V appears stable and well-managed. Although there was a failure in 2020 regarding headlamp aim and various advisories related to tyre wear and perishing, the vehicle has maintained a consistent passing record over the last six years. This suggests that the owner has been proactive in addressing necessary adjustments and consumables to meet regulatory standards. The recorded mileage of 40,583 miles is notably low for a nine-year-old vehicle, representing an annual average of approximately 4,500 miles. While this lower mileage typically equates to less mechanical fatigue on the drivetrain, engine internals, and suspension assembly, it carries specific risks associated with infrequent use. Vehicles that cover low distances often spend significant time stationary, which can lead to the degradation of rubber components, the settling of contaminants in fluids, and the potential for battery health issues. During your inspection and test drive, pay close attention to the condition of the tyres. The 2025 advisory specifically highlighted cracking and perishing on the rear tyres; even if these were replaced, you must inspect all four tyres for sidewall cracking or age-related dry rot, as rubber degrades over time regardless of tread depth. Listen for any rhythmic thumping or uneven tyre wear during the drive, which could indicate alignment issues. Given the low annual mileage, you should also inspect the brake discs for excessive corrosion and check for any signs of binding calipers, which can occur if the vehicle has been standing for long periods. Furthermore, verify the service history to ensure that maintenance has been conducted on a time-based rather than purely mileage-based schedule. Low-use engines require regular oil changes to prevent moisture buildup and sludge. Check the condition of the 12V battery and ensure the cooling system and brake fluid have been changed according to the manufacturer's time intervals. Finally, inspect the underside for any signs of surface corrosion or fluid leaks that may have developed due to the vehicle's usage profile, and confirm that all suspension bushes and steering components feel tight and free from excessive play.