2009 Chevrolet Aveo 1.2L Petrol · LR59 BWY

The vehicle’s most recent MOT test on 2025-11-04 at 73,426 miles resulted in a failure, with no defects recorded—indicating the test was not completed due to an unresolved issue or administrative reason. This follows a series of three consecutive failures in late 2024, all occurring within a two-week window between 2024-10-21 and 2024-11-13, despite the same mileage range (71,918 to 72,033 miles). The pattern suggests persistent mechanical issues that were not resolved after multiple attempts, raising concerns about underlying faults that may have been ignored or inadequately repaired. The lack of defect details across these tests is unusual and points to either incomplete testing or systemic problems preventing proper assessment. The recorded mileage shows a consistent annual average of approximately 4,319 miles over its 17-year lifespan, which is notably low for a vehicle of this age. However, the data reveals a significant gap between the 2023-10-17 test at 66,607 miles and the next test in October 2024 at 71,918 miles—a jump of 5,311 miles in just under twelve months. This sudden increase in usage may indicate a change in ownership, storage conditions, or a shift from infrequent use to regular operation, potentially accelerating wear on components such as tyres, suspension bushes, brake pads, and drivetrain elements. The absence of any intermediate MOTs between 2023 and 2024 further limits visibility into the vehicle’s condition during that period. Given the repeated failures without recorded defects, a physical inspection is essential before purchase. Focus should be placed on the braking system, particularly rear calipers and discs, which may exhibit binding or uneven wear. Suspension components—including coil springs, control arms, and bushings—should be checked for excessive wear or sagging, especially if the car has been driven more frequently recently. Structural integrity must also be verified, as long periods of inactivity can lead to hidden rust in floor pans, sills, or wheel arches. Additionally, verify the condition of the exhaust system and emissions controls, as these are common causes of failure when not properly maintained. A full diagnostic scan and road test are strongly advised to uncover any latent faults masked by the failed MOT entries.