2010 Chevrolet Aveo 1.2L Petrol · LS10 TWN

The 2010 Chevrolet Aveo currently fails the MOT due to excessive wear in the offside front suspension arm ball joint and unresolved emissions issues, indicating a deteriorating mechanical condition. The most recent test in September 2025 reveals a significant structural fault that compromises handling and safety, while the emissions failure suggests deeper engine or sensor problems that may not have been addressed. This represents a worsening trend compared to the previous year’s clean pass, highlighting a potential lack of proactive maintenance. The vehicle has accumulated 121,374 miles over 16 years, averaging approximately 7,586 miles annually—a typical rate for its age. The MOT history shows consistent testing every 12 months, with no major gaps, allowing a clear view of its condition over time. Mileage increased from 62,562 to 101,574 between 2022 and 2024, then jumped to 121,374 in 2025, suggesting a steady usage pattern without long periods of inactivity. The absence of major defects in 2023 and 2024 indicates the car was reasonably maintained during those years. Key concerns include the suspension ball joint failure, which poses a serious safety risk and requires immediate attention. The recurring emissions issue may point to unresolved engine faults, possibly affecting fuel economy and environmental compliance. Buyers should inspect the front suspension components thoroughly, including control arms, ball joints, and tie rods, as well as the rear brakes, which were flagged for binding in the 2025 test. Additionally, check for corrosion in the body structure, particularly around wheel arches and sills, as older vehicles like this are prone to rust-related weakening.