2016 Audi A3 2.0L Petrol · M70 DBA

The 2016 Audi A3 has maintained a clean MOT history across all five tests, with no defects or advisories recorded since the most recent inspection on 30 December 2025 at 139,097 miles. This consistency suggests the vehicle has undergone regular servicing and has avoided major mechanical failures. The absence of recurring issues—such as binding brakes, excessive suspension wear, or structural corrosion—indicates that previous owners have likely addressed routine maintenance promptly. However, the lack of advisories does not preclude hidden wear; a thorough inspection remains essential, particularly for components prone to gradual degradation at this mileage. The recorded mileage of 139,097 miles over a decade implies an average of approximately 13,900 miles per year, which is elevated for a vehicle of this age. Notably, the largest mileage jump occurred between the 2022 (116,528 miles) and 2024 (123,679 miles) tests, covering 7,151 miles in just under two years—a significant increase that may reflect heavier usage. The intervals between tests are consistent at one year, which aligns with the legal MOT requirement but does not guarantee intermediate servicing. While the vehicle has not failed an MOT, this mileage pattern raises questions about whether more frequent servicing—especially for fluid changes, suspension components, and brake systems—was conducted. Given the high mileage and the absence of recorded advisories, a buyer should prioritise an in-person inspection of critical wear items. The suspension, particularly the coil springs, bushes, and dampers, warrants close examination for uneven wear or excessive play, as these components degrade incrementally and can compromise handling. Brake discs and calipers should be checked for lateral wear, binding, or uneven thickness, as repeated high-mileage periods increase the risk of uneven fade or failure. Additionally, the subframe and wheel arches should be scrutinised for corrosion, as rust can compromise structural integrity without immediately failing an MOT. Finally, the exhaust system and emissions components should be inspected for leaks or excessive corrosion, as these often go unnoticed until they affect performance or passability.