2007 Ford Fiesta 1.2L Petrol · MJ57 DDO

Recurring issues with lighting, tyre integrity, and exhaust mounting characterize the mechanical profile of this Ford Fiesta. The vehicle's recent history shows a pattern of significant failures, most notably a dangerous defect in October 2025 involving a structural tyre failure and mismatched tyre sizes on the same axle. While the vehicle passed its most recent test on 30 October 2025, the record shows a trend of immediate re-tests following major and dangerous failures, indicating that several critical safety components required urgent attention to meet minimum standards. The recorded mileage of 138,213 miles over approximately 19 years equates to an average annual accumulation of roughly 7,274 miles. This usage pattern is typical for a vehicle of this age, suggesting consistent, moderate road use rather than heavy commercial application or long periods of stationary storage. Mechanically, this level of mileage means that while the engine and drivetrain have not been subjected to extreme high-frequency use, components such as suspension bushes, braking systems, and exhaust assemblies are likely approaching the end of their natural service life due to age-related degradation and typical wear. Prospective buyers should pay close attention to the exhaust system and braking performance during a test drive. The most recent advisory notes a defective rear exhaust mounting, and a previous advisory from 2024 identified a minor exhaust gas leak. Listen for excessive vibration, rattling, or a change in engine note when idling or accelerating, which could indicate the exhaust is hanging loosely or has structural leaks. Furthermore, the 2025 test noted that the rear handbrake was only just meeting requirements. During a test drive, test the handbrake's effectiveness on an incline and check for any binding or uneven braking application when the pedal is released. The history of tyre-related failures, including structural bulges and tears, warrants a thorough inspection of the current rubber and wheel assemblies. Check the sidewalls of all four tyres for any signs of bulging, cracking, or uneven wear, and ensure that identical tyre specifications are fitted to each axle to prevent handling instability. Additionally, given the 2022 advisories regarding pitted and scored brake discs alongside thinning pads, observe the braking zone for any pedal judder or pulsing, which would indicate uneven disc surfaces, and listen for any squealing that suggests the pads are nearing the end of their functional life.