2020 Cupra Leon First Edition Phev S-A 1.4L Hybrid electric · MM08 BEN

The vehicle is currently in a stable and roadworthy condition, with no defects recorded in the most recent MOT on 2025-11-24 at 83,584 miles. This follows two consecutive clean MOTs in 2024 and 2023, indicating a consistent maintenance pattern and no emerging mechanical issues over the past three years. The absence of advisories or failures suggests that the core systems—braking, steering, suspension, and emissions—have been well maintained, and there are no immediate safety concerns based on the official test history. The mileage accumulation reflects a high annual usage rate of approximately 13,931 miles per year since 2020, which is significantly above average for a vehicle of this age. The jump from 58,282 miles in November 2023 to 69,148 miles in November 2024 represents an increase of nearly 11,000 miles within one year, followed by another 14,436 miles to reach 83,584 miles by late 2025. This rapid wear profile raises expectations for accelerated degradation in consumables such as tyres, brake pads, and suspension components, even if the current tests show no defects. The lack of any faults in these high-mileage periods is encouraging but does not eliminate the need for close inspection of wear-prone parts. Despite the clean MOT record, a buyer should conduct a thorough in-person inspection focusing on the drivetrain, particularly the electric motor and battery pack integration given the PHEV configuration. The rear suspension, including coil springs and control arms, should be checked for signs of fatigue or binding, especially given the high annual mileage. Brake discs and calipers must be examined for uneven wear or corrosion, as repeated high-speed braking can lead to premature deterioration. Additionally, the exhaust system and underbody should be scrutinised for rust or damage, particularly around wheel arches and chassis rails, as sustained use increases exposure to moisture and road debris. A full service history would further validate the consistency of upkeep behind these results.