2018 Peugeot Expert 1.6L Diesel · MS64 PET

The vehicle most recently passed its MOT on 6 March 2026, although this followed a failure involving critical suspension and drivetrain components. While the vehicle has a consistent history of passing, the overall maintenance trend suggests a decline in the condition of the front-end running gear. The shift from clean tests in previous years to major failures and multiple advisories regarding damping and wear indicates that the vehicle is entering a phase of increased maintenance requirements typical for its age and usage profile. With 72,262 recorded miles over approximately eight years, the vehicle has averaged roughly 9,033 miles per annum. This represents a typical usage rate for a light commercial vehicle of this type, suggesting it has avoided the extreme wear associated with high-mileage fleet work as well as the degradation caused by prolonged standing. However, this mileage often coincides with the natural expiration of rubber components, such as bushings and boots, which is reflected in the recent recorded defects. Prospective buyers should pay close attention to the front suspension and steering. Although the lower suspension arm ball joint and CV boot were addressed for the most recent pass, the remaining advisories regarding reduced damping in both front shock absorbers are significant. During a test drive, listen for knocks or clunks over uneven surfaces and observe if the front end exhibits excessive bouncing or instability under braking. The previous history of pitted and scored brake discs, alongside a flexi-pipe exhaust leak, suggests a need to verify that these items have been fully replaced rather than merely patched, as pitted discs can lead to brake shudder and reduced stopping efficiency. The MOT history shows a recurring pattern of tyres reaching their legal limit, indicating a need to check the current tread depth and look for uneven wear patterns which could signal remaining alignment issues. Given the vehicle's age, you should verify the service history for evidence of timely oil and filter changes and check the health of the 12V battery. Ensure the exhaust system is secure and free from leaks, specifically at the flexi-joint, and inspect the underbody for any signs of corrosion that may have developed, as these are common areas of concern for this model.