2020 Honda WW 0.1L Petrol · MW20 UZF

The vehicle is currently roadworthy, but the maintenance history reveals a reactive rather than proactive ownership pattern. While it passed its most recent test in August 2025 at 66,042 miles, it had failed just one week prior due to multiple critical safety defects. The transition from a failure involving binding brakes and sub-legal tyre tread to a pass suggests the owner performed only the minimum repairs required to secure a certificate, rather than addressing the underlying causes of long-term mechanical wear. The mileage progression is consistent with a six-year-old vehicle, averaging approximately 11,000 miles per annum. Between the July 2023 test at 39,745 miles and the August 2024 test at 53,373 miles, the car covered over 13,000 miles. The subsequent interval saw another 12,669 miles by August 2025. This steady usage pattern suggests the vehicle is driven regularly, which explains the accelerated wear on consumable components between the testing intervals. A buyer must prioritize an inspection of the braking system and suspension assembly. The record shows a recurring issue with brake performance, moving from a binding front brake in 2024 to an excessively binding condition in August 2025, followed by pitted rear drums and worn front discs. The rear shock absorber was also flagged for reduced damping, indicating that the suspension components are nearing the end of their effective life. Furthermore, the failure for a rear tyre being at 1.0mm in 2025 highlights that basic maintenance was neglected until it reached legal limits. The bodywork requires close scrutiny as the tester noted multiple cracks throughout the panels in 2025. While these were classified as not sharp, the structural implications should be verified to ensure they do not mask deeper corrosion or indicate previous stress damage to the frame. The presence of bent brake levers and missing footrests further suggests the vehicle has suffered minor impacts or general neglect, necessitating a thorough physical check of all external fittings and structural integrity before purchase.