2020 Nissan Serena 1.2L Hybrid electric (clean) · MX70 PCF

A consistent record of clean MOT results defines this vehicle's recent mechanical history, with the two most recent tests on 16 January 2026 and 06 May 2026 both returning with no recorded defects. This lack of advisories or failures across the latest inspections indicates that the components subject to statutory testing have met the required standards of roadworthiness during these specific intervals. The vehicle's usage profile shows an average annual accumulation of approximately 10,917 miles over its six-year lifespan, which aligns with typical UK driving patterns for a vehicle of this age. This steady mileage suggests a regular operational cycle rather than long periods of inactivity or excessive high-speed motorway use. Mechanically, this level of usage implies a predictable rate of wear on consumable items such as brake pads, discs, and suspension bushes, though it does not provide evidence of a comprehensive service history beyond the MOT requirements. Given the absence of recorded defects or advisories in the DVSA history, there are no specific mechanical faults to target for investigation. However, because the MOT is a snapshot of roadworthiness at a single point in time, a test drive should focus on verifying the condition of components that are not always subject to failure during a standard inspection. You should listen for any dull knocks or clunks from the suspension when navigating uneven surfaces, which could indicate worn bushes or dampers, and check for any steering pull or vibration through the steering wheel at varying speeds. Further attention should be paid to the braking system by feeling for any pedal judder or sponginess, which might suggest uneven disc wear or air in the system. While the recent records are clear, you should also inspect the area around the engine bay for any signs of oil misting or weeping from gaskets and check the underside of the vehicle for any early signs of corrosion on the exhaust or subframe. These checks will help confirm that the mechanical state of the vehicle remains consistent with the clean MOT documentation provided.