2006 Nissan Micra 1.6L Petrol · NA56 XUY

The vehicle is currently roadworthy, but the maintenance history reveals a trend of reactive repairs rather than proactive upkeep. While it passed its most recent test in April 2026 at 96,084 miles, it had failed just three days prior due to a fractured nearside front coil spring and worn brake components. The recurring presence of worn front suspension arm bushes and pitted brake discs across multiple tests suggests that components are only being addressed once they reach the point of inspection failure rather than being replaced during routine service intervals. At approximately 20 years old, the mileage of 96,084 miles represents a low annual average of roughly 4,800 miles. The data shows consistent usage patterns over the last two years, with approximately 4,000 miles covered between May 2024 and April 2025, and another 3,800 miles covered by April 2026. This low mileage deplet often correlates with age-related degradation of rubber parts and metal components, which aligns with the persistent corrosion issues noted throughout the record. A buyer must scrutinise the structural integrity of the suspension mountings, as noted corrosion on the rear components has appeared consistently since 2024. The tester previously flagged surface corrosion on all four brake hose ferrules, which requires a physical check for perished rubber that could cause sudden failure. The exhaust system also shows a history of deterioration and leaks dating back to 2024, likely requiring a full replacement to avoid further emissions or noise issues. The ABS fault recorded in 2025 should be verified to ensure the system was properly rectified and not merely cleared. Additionally, the slightly distorted front road wheels noted in 2024 should be inspected for impact damage or uneven wear that could cause vibrations at higher speeds. Given the recent failure of the coil spring and suspension bushes, a thorough test of the front end for lateral play is necessary to ensure the recent repairs were completed to a professional standard.