2006 Ford Transit 2.4L Diesel · NH06 AEZ

The vehicle presents a worsening maintenance profile, with the most recent MOT test in January 2026 at 166,142 miles highlighting significant ongoing issues. While the vehicle continues to pass, the frequency and nature of the advisories suggest a decline in mechanical upkeep. The tester flagged corroded rear brake pipes on both sides, an oil leak, thinning front brake pads, and visible signs of corrosion. These issues represent a shift from the relatively clean records seen in earlier years toward more serious structural and fluid-retention concerns. A significant change in usage patterns is evident in the mileage data. Between February 2025 and January 2026, the vehicle covered 100,742 miles, a massive increase compared to the much lower annual averages recorded previously. This rapid accumulation suggests the van has transitioned from light use to intensive commercial operation. While the overall average of roughly 8,300 miles per year over its lifetime appears typical for a 20-year-old vehicle, the recent surge in mileage places much higher stress on the drivetrain, suspension, and braking systems. A prospective buyer must conduct a thorough physical inspection of the chassis and braking system. The recurring presence of corroded brake pipes, noted in 2023, 2024, 2025, and 2026, indicates a persistent issue with the hydraulic lines that requires immediate attention to prevent sudden failure. The repeated mentions of oil leaks since at least 2023 and the recent report of vehicle corrosion suggest that underlying engine or structural degradation may be occurring. Specific attention should also be paid to the suspension and steering components. The record shows a history of worn anti-roll bar bushes and steering rack inner joint play. Given the recent high-mileage usage, the integrity of the suspension bushes, coil springs, and wheel bearings should be verified. Finally, the condition of the windscreen and various lighting defects, such as the inoperative registration plate lamp, should be checked to ensure all consumables and electrical components meet current standards.