2009 Ford Transit Connect 1.8L Diesel · NJ59 POU

The 2009 Ford Transit Connect presents a stable and largely reassuring maintenance trend, culminating in a clean pass on the most recent MOT dated 9 October 2024 at 124,692 miles. That test recorded zero defects of any kind. A prior test on 26 September 2024 at 124,684 miles shows a fail with no defects listed, which typically indicates an administrative or procedural issue rather than a mechanical failure. The underlying record is one of consistent compliance, with no recurring faults, no advisories, and no pattern of worsening or unresolved defects across the five-year span from 2021 to 2024. Mileage accumulation tells a coherent story. Between the 2021 test at 116,658 miles and the 2024 test at 124,692 miles, the vehicle added 8,034 miles over three years, averaging roughly 2,678 miles annually during that window. That is lower than the lifetime average of approximately 7,335 miles per year, suggesting the van saw reduced use in its most recent period or spent extended time stationary. The gap between the 2024 tests is just 8 miles over 13 days, consistent with a retest following the procedural fail. No anomalies or sudden jumps appear in the odometer record. The absence of any flagged defects across multiple tests is notable for a vehicle of this age and type. Even so, a prospective buyer should conduct a thorough in-person inspection focused on areas the MOT does not continuously monitor. Check the chassis and load floor for corrosion, particularly around mounting points and box-section seams where moisture accumulates. Examine suspension bushes, coil springs, and shock absorbers for deterioration, as these degrade gradually and may not trigger a failure until severely worn. Inspect the condition of brake discs, pads, and calipers, along with tyre wear patterns, since the van's commercial duty cycle places recurring stress on these components. Verify exhaust integrity and emissions performance under load, and assess the steering rack and column joints for play that might not surface during a static test.