2013 Volkswagen Polo 1.2L Petrol · NJ63 CPU

A consistent track record of clean MOT results defines this vehicle, with the most recent test on 28 August 2025 showing no defects recorded. This pattern of passing consecutive annual inspections without any recorded failures or advisories has been maintained since at least 2021, suggesting a stable history of roadworthiness regarding the components inspected under the DVSA testing regime. The recorded mileage of 90,434 miles over a thirteen-year period equates to an average annual accumulation of approximately 6,956 miles. This usage profile is consistent with typical light-to-moderate annual mileage for a vehicle of this age. Mechanically, this level of usage suggests that components such as the drivetrain, suspension linkages, and braking system have not been subjected to the high-frequency wear associated with heavy long-distance commuting, though the vehicle has remained in regular enough use to avoid the potential issues associated with prolonged periods of inactivity. Given the absence of any recorded advisories for corrosion, structural integrity, or fluid leaks in the recent history, a test drive should focus on confirming the current state of the suspension and steering components. While no specific defects have been flagged, a buyer should listen for any knocks or knocks from the suspension bushes or coil springs when traversing uneven surfaces, and check for any pulling to one side during braking to ensure the calipers and discs remain free and functional. The lack of recorded emissions or exhaust-related failures is a positive indicator of the current state of the exhaust system and engine management. During the test drive, pay close attention to the engine's idling stability and the smoothness of acceleration to ensure no intermittent faults are present that fall outside the scope of the standard MOT inspection. Monitoring for any visible oil misting or weeping around the engine bay during a post-drive inspection would also be a prudent step to verify the continued integrity of the seals and gaskets.