2014 Honda Civic 1.6L Diesel · NJ64 ACO

This 2014 Honda Civic has demonstrated a consistently stable roadworthiness record over the past four MOT cycles, with each test conducted without defects or advisories. The most recent examination, on 2025-05-12 at 82,274 miles, confirms no issues were identified, reinforcing a pattern of compliance with DVSA standards. While the absence of recurring faults suggests the vehicle has been maintained at a baseline level, the lack of advisories also implies that even minor wear—such as suspension bushes or brake pad thickness—has not been addressed between tests. Buyers should verify whether routine servicing has been performed, as the record does not reflect service intervals, which are critical for components like timing belts, fluid changes, and throttle body cleaning. The mileage progression of approximately 5,380 miles per year between tests (from 64,954 miles in May 2022 to 82,274 miles today) aligns with typical usage for a vehicle of this age. There are no abrupt jumps or prolonged stagnation periods that would indicate neglect or excessive standing. The even spacing of tests—roughly every 12,000 miles—supports the assumption that the car has been driven regularly rather than stored. However, the absence of a pre-MOT service record means some wear items, such as brake pads or wiper blades, may be approaching their replacement thresholds. Given the clean MOT history, the primary focus for an in-person inspection should centre on suspension integrity and brake condition. The tester’s failure to note any advisories on rear or front suspension components—such as worn coil springs, deteriorated bushes, or binding calipers—is reassuring, but buyers should physically check for uneven tyre wear, which could signal misaligned wheels or failing struts. Brake discs and pads, while not explicitly flagged, should be measured for remaining thickness; failing twice on tyre tread suggests basic upkeep was skipped, so tread depth and lateral wear patterns warrant close scrutiny. Structural corrosion, particularly around wheel arches and sills, is another area to examine, as it often develops silently between MOT tests. Finally, verify that exhaust emissions remain within legal limits, as catalytic converter efficiency can degrade without visible symptoms.