2004 Vauxhall Combo 1.7L Diesel · NX04 UXN

The most recent MOT test conducted on 13 September 2025 resulted in a pass. An evaluation of the records from 2023 onwards indicates a stable maintenance trend. Although failures were recorded in both 2024 and 2025, these were rectified immediately to achieve a pass, and the absence of recorded advisories suggests the vehicle is being maintained to a consistent standard. For a commercial vehicle of this vintage, such a clean record is uncommon and suggests a proactive approach to keeping the vehicle roadworthy. With a recorded mileage of 188,995 miles over 22 years, the vehicle has averaged approximately 8,591 miles per year. This usage rate is typical for a light commercial vehicle and indicates consistent operation rather than long periods of standing. However, approaching 190,000 miles implies significant cumulative wear on the drivetrain, engine internals, and structural components. At this mileage, the degradation of consumables and rubber components is inevitable, regardless of the lack of recent MOT failures. Because the DVSA record is devoid of specific defects or advisories, the buyer must focus on age-related degradation and high-mileage wear that may not necessarily trigger an MOT failure. A thorough physical inspection of the chassis and underbody is essential to check for corrosion, particularly around the sills and suspension mounting points, which are known vulnerability areas for this model. During a test drive, listen for suspension clunks or knocks and feel for any vagueness in the steering, which would indicate that the suspension bushes or coil springs are perishing. Furthermore, it is critical to verify the service history to confirm that the timing belt and water pump have been replaced according to the manufacturer intervals, as a failure here would result in total engine loss. Inspect the tyres for sidewall cracking or perishing, even if the tread depth is legally sufficient, and check for uneven wear that could signal wheel misalignment. Finally, assess the health of the 12V battery and check for fluid leaks from the engine or gearbox, ensuring that the engine oil and coolant are clean and free of contamination.