2009 Aston Martin V8 Vantage 5.3L Petrol · OO07 RLS

The most recent MOT test for the 2009 Aston Martin Vantage was completed on 2026-03-02 and resulted in a PASS. However, the history reveals a pattern of advisories related to the front tyres, indicating potential wear or damage that may have developed over time. These recurring issues suggest the vehicle has experienced some level of stress on its suspension and tyre systems, which could affect handling and safety if not addressed. The advisory notes also point to the need for careful monitoring of tyre condition, especially given the vehicle's age and the relatively low annual mileage reported. The recorded mileage of 33,543 miles translates to approximately 1,973 miles per year, which is significantly lower than the typical usage for a car of this age. This suggests the vehicle may have been driven infrequently or stood for extended periods, which can accelerate wear on critical components such as the suspension bushings, brake discs, and electrical systems. While the mileage is not excessively high, the low usage rate combined with the age warrants a thorough inspection of the structural integrity, particularly the frame and underbody, to ensure there are no hidden damage points. For a buyer considering this vehicle, it is essential to conduct a detailed pre-purchase inspection focusing on tyre condition, checking for any signs of perishing or cracking on the sidewalls, which could indicate internal deterioration. During a test drive, listen for any clunking noises from the suspension and pay close attention to uneven tyre wear patterns, which may signal alignment issues or imbalance. The braking system should be evaluated for any shudder or vibration, especially if the advisory mentioned binding calipers. Additionally, verify the battery health and fluid levels, as these are critical for reliability. Given the clean MOT record, the buyer should also confirm that service book stamps are present and that the vehicle has received regular maintenance. If the tyre advisories persist or worsen, consider scheduling a professional assessment before committing to purchase. When inspecting the vehicle, prioritize checking the tyre sidewalls for any signs of perishing or delamination, which are common in older models. Inspect the brake discs for corrosion or uneven wear, and test the binding calipers for proper operation. The 12V battery should be tested for voltage stability and overall health, as age-related degradation can impact starting performance. Fluid levels in the cooling system, brake, and power steering should be verified, along with the condition of the exhaust system. Since the vehicle has a clean MOT history, the focus should shift to age-related wear rather than recent faults. A well-executed inspection at this stage can mitigate risks and ensure the car meets safety standards before it hits the road.