2017 MINI Cooper 1.5L Petrol · OO53 SAM

A recurrent pattern of tyre wear and friction material depletion defines the mechanical history of this 2017 Mini Cooper, culminating in a pass recorded on 20th October 2025 at 37,190 miles. While the vehicle holds a generally successful test record with no structural failures or corrosion flagged across its history, the frequency of tyre-related advisories points to ongoing edge-wear tendencies. The most recent inspection noted that both front tyres were worn close to the legal limit and on their edges, mirroring similar warnings issued for the offside rear tyre in both 2022 and 2023, alongside a recorded failure in October 2021 due to brake pads worn down to their indicators. Accumulating approximately 4,132 miles per year over its nine-year lifespan, the vehicle exhibits a notably low usage profile compared to national averages. This modest mileage rate does not feature any extended gaps in testing or multi-year lay-ups, indicating that the car has remained in regular, albeit light, commission rather than sitting dormant for prolonged periods. Mechanically, this low annual distance means drivetrain and chassis components have been spared high-mileage fatigue, though short urban journeys often associated with low-mileage hatchbacks can accelerate localized wear on friction components and exhaust systems. Prospective buyers must pay close attention to the suspension geometry and steering alignment during a test drive to investigate the root cause of the repeated tyre edge-wear advisories noted in the MOT data. Listen closely for any knocks, clunks, or tracking wander over uneven road surfaces, which would indicate compromised control arm bushes, ball joints, or incorrect tracking setting up uneven contact patches. Check the inner and outer tread depths across all four corners immediately, as replacement tyres will likely be required in the very near future. Given the history of brake pad depletion resulting in a 2021 test failure and subsequent advisories, a thorough physical and dynamic inspection of the braking system is essential before purchase. Inspect the condition of the brake discs for excessive lip formation and scoring, and ensure the pedal feels firm with no excessive travel or judder under braking from higher speeds. Verify that the calipers release cleanly without binding, which can cause premature friction material wear and reduced fuel efficiency on this platform.