2014 Audi A6 4.0L Petrol · OR56 NJC

The most recent MOT test completed on 26 June 2026 resulted in a pass with no defects recorded. Evaluating the overall maintenance trend, the vehicle demonstrates a stable and improving profile. While there was a notable failure in November 2022 involving major defects related to exhaust carbon monoxide levels and Lambda readings, the subsequent string of clean passes indicates that these engine management or emission-related issues were effectively addressed. The lack of any advisories or defects in the most recent three years of testing suggests a consistent level of upkeep and a successful resolution of previous mechanical concerns. The recorded mileage of 102,825 miles is consistent with the vehicle's 12-year age, representing an average annual usage of approximately 8,569 miles. This level of usage is typical for a premium saloon and suggests the vehicle has not been subjected to the heavy wear associated with high-mileage commercial use, nor the potential stagnation issues of extremely low mileage. However, at this stage of its life cycle, the vehicle is entering a period where components such as suspension bushes, coil springs, and various rubber seals may begin to perish or lose their structural integrity, which requires careful physical scrutiny. As the recent MOT history is clean, your physical inspection should focus on age-related degradation and time-based maintenance. Carefully examine the tyres for any signs of sidewall cracking or perishing, which can occur due to rubber oxidation even if the tread depth remains high. During the test drive, listen for any clunks or knocks from the suspension, which could indicate worn bushes or dampers, and check for any brake shudder or pulsation that might suggest warped discs or binding calipers. It is also important to inspect the underside for any signs of fluid leaks or excessive corrosion on the exhaust system and chassis that may not have been captured in the formal testing. Finally, you must verify the service history to ensure that all time-sensitive maintenance has been carried out. Because fluids like brake fluid, coolant, and engine oil degrade over time regardless of mileage, you should confirm that these have been changed according to the manufacturer's calendar-based intervals. Given the previous emission failure, pay close attention to the engine's idling stability and listen for any unusual hesitation or changes in exhaust note during acceleration. Verifying the presence of consistent service stamps will be the most reliable way to confirm that the vehicle's mechanical health has been maintained alongside its relatively moderate usage.