2023 Polestar 2 EV FWD Electric · OV23 BLF

The latest MOT test conducted on 10 February 2026 resulted in a pass with no defects recorded, indicating the Polestar 2 EV maintains a clean and stable maintenance trend at this stage of its life. With only one MOT entry available and no advisories or failures documented, the vehicle demonstrates compliance with roadworthiness standards without immediate concerns. This suggests either diligent upkeep or minimal deterioration in the components assessed during the test. At approximately three years old with 30,113 miles recorded, the annual mileage averages around 10,038 miles, which aligns with typical usage for a vehicle of this age. This moderate mileage implies a balanced wear rate on consumables such as tyres, brakes, and suspension components, without the accelerated degradation associated with high mileage or the potential issues from prolonged inactivity, such as seized calipers or degraded seals. Prospective buyers should prioritise a thorough physical inspection, focusing on age-related degradation that may not yet manifest in MOT defects. Check the tyres for sidewall cracking or perishing, as rubber compounds degrade over time regardless of mileage. Assess the 12V auxiliary battery health, as EV auxiliary batteries can weaken with age and cause electrical system issues. Inspect the brake discs and calipers for corrosion or binding, particularly if the vehicle has spent extended periods stationary, as EVs rely heavily on regenerative braking, which can lead to underused friction brakes seizing. Additionally, verify the condition of suspension bushes, coil springs, and shock absorbers for signs of wear or leakage, as these components can deteriorate with time and use. Confirm that all fluid levels, including brake, coolant, and windscreen washer, are within specification, as these are often overlooked in EVs due to the absence of traditional engine oil changes. Finally, review the service history to ensure time-based maintenance, such as cabin air filter replacement and software updates, has been carried out in accordance with the manufacturer’s schedule.