2006 Mazda 5 2.0L Diesel · PJ56 BZR

The Mazda 5 CR features a multi-link rear suspension setup that delivers sharp handling but places immense stress on the rear trailing arm compliance bushes. When carrying family passengers and luggage over UK potholes, the rubber bushes perish, deform, and delaminate. This introduces uncontrolled negative camber and dynamic toe-out on the rear wheels. As a result, the inner edges of both rear tyres scrub down to the cords prematurely, often in as little as 8,000 miles, while the outer tread remains deceptively healthy. Drivers experience a wandering rear axle over motorway expansion joints and road noise, and the hidden cord wear results in immediate UK MOT failure.

The 2.0-litre CiTD common-rail diesel engine fitted to the Mazda 5 CR utilises a closed-loop Diesel Particulate Filter (DPF) system that requires sustained exhaust temperatures to burn off trapped soot. On typical UK family school runs and urban errands, the car repeatedly attempts active regenerations by injecting extra post-combustion fuel. Unburnt diesel washes down cylinder walls into the oil sump, causing the engine oil level to rise progressively. Mazda added an 'X' mark above the full mark on the dipstick; if oil reaches this point, there is grave danger of diesel engine runaway or oil starvation. Concurrently, the DPF warning light flashes, requiring forced static regeneration and immediate oil replacement.