2019 Vauxhall Adam 1.2L Petrol · PL19 AYO

A pattern of intermittent component wear and minor electrical failures defines the mechanical history of this Vauxhall Adam, though the most recent test on 14 May 2026 shows a pass with no defects following a failure for a non-functional nearside front dipped beam headlamp. While the record shows a progression toward a clean certificate in the latest inspection, previous years have flagged recurring issues with consumable items and suspension components. The transition from advisories regarding shock absorber oil misting and tyre wear in 2023 and 2024 to a clean result in 2025 and 2026 suggests that these specific items have been addressed or have reached a state of compliance. The vehicle has covered 39,296 miles over approximately seven years, representing an average annual accumulation of roughly 5,614 miles. This is a low mileage profile for a vehicle of this age, which can imply lighter usage but also carries the risk of components such as suspension bushes, seals, and tyres ageing due to time rather than distance. Low-mileage vehicles that spend significant periods stationary can sometimes exhibit more rapid degradation in rubber components or fluid seals, though the MOT history does not show evidence of long-term storage or significant testing gaps. Prospective buyers should pay close attention to the suspension and braking systems during a test drive, specifically addressing the history of oil misting on the rear shock absorbers and the previous advisory for thin front brake pads. When driving over uneven surfaces or speed bumps, listen for any knocking, clunking, or bouncing that could indicate the shock absorbers are failing to dampen movement effectively. Regarding the braking system, any pulsation through the brake pedal or a pulling sensation to one side during deceleration should be investigated, as these can be symptoms of worn pads or unevenly worn discs. Tyre condition also warrants a physical inspection, given the previous advisories for tyres wearing close to the legal limit or unevenly on the edges. Check the tread depth across the entire width of the tyre and look for signs of uneven wear, which can indicate underlying issues with wheel alignment or suspension geometry. Finally, ensure the headlamp functionality is fully operational, as the failure in May 2026 indicates that the electrical or bulb components have required attention recently.