2016 Hyosung GT 0.1L Petrol · PL66 WFF

The most recent MOT inspection on 11 March 2026 resulted in a pass with no recorded defects. Looking at the historical data, the vehicle has consistently passed its inspections, although there were recorded failures in 2021 and 2026 that did not specify the exact cause of failure in the provided records. Despite these intermittent failures, the maintenance trend appears stable, as the vehicle is currently meeting all essential roadworthiness requirements without any ongoing advisories or recurring issues noted in the recent history. The recorded mileage of 2,316 miles is remarkably low for a ten-year-old vehicle, representing an annual average of approximately 232 miles. While this suggests very little mechanical wear on the engine, gearbox, and drivetrain, such extremely low usage often indicates that the vehicle has been stored for long periods without regular operation. This presents a different set of risks compared to high-mileage vehicles; rather than component exhaustion through friction, the primary concerns are degradation caused by inactivity and the chemical breakdown of essential fluids and rubber components. Given the low mileage and age, a prospective buyer should prioritise a physical inspection of consumables that perish with time rather than use. Closely examine the tyres for signs of sidewall cracking, perishing, or flat spotting, as the rubber may have hardened and lost its grip despite having significant tread depth. Check the brake discs for heavy corrosion or pitting and ensure the calipers are not binding, which can happen when the pistons remain stationary for extended periods. It is also vital to verify the service history to confirm that oil, coolant, and brake fluid have been changed according to a calendar-based schedule rather than just mileage intervals, as these fluids lose their protective properties over time. During the test drive, pay close attention to the mechanical integrity of the vehicle. Listen for any unusual noises from the suspension bushes or the drive chain, and check for any signs of fluid leaks from seals that may have become brittle or dried out due to lack of use. Ensure the 12V battery is holding a strong charge and that the electrical system is functioning without intermittent faults. Finally, verify that the vehicle's structural integrity is sound and that there is no evidence of significant corrosion on the frame or exposed metal parts, which can occur when a vehicle is kept in a damp or stagnant environment.