2020 Audi Q5 S LN Comp 55 Tfsi E Quat SA 2.0L Hybrid electric · PN20 HDD

The vehicle presents a highly consistent and stable maintenance profile according to the official DVSA records. The most recent MOT inspection conducted in March 2026 resulted in a clean pass with no recorded defects or advisories, following three consecutive years of identical outcomes. This lack of recorded failures or even minor advisories suggests that the vehicle has been subject to diligent upkeep and that its structural integrity and primary safety components have remained within acceptable tolerances throughout its recent history. With a recorded mileage of 50,811 miles over approximately six years, the vehicle has averaged roughly 8,500 miles per annum. This usage level is entirely typical for a premium SUV and indicates a balanced driving profile. It avoids the extreme wear associated with high-mileage commercial use while also avoiding the potential mechanical stagnation and fluid degradation often seen in vehicles that remain stationary for extended periods. This moderate mileage suggests that consumables such as brake pads, tyres, and suspension components should be in a serviceable state, though they will be approaching mid-life replacement intervals. As the MOT history is devoid of any noted defects, your physical inspection should focus on age-related degradation that may not yet have triggered an MOT failure. Closely examine the tyres for signs of perishing, such as sidewall cracking or fine splits, which can occur due to age and UV exposure even if the tread depth remains high. Given the vehicle is a plug-in hybrid, verify the integrity of the charging port and ensure all necessary charging equipment is present. During the test drive, listen for any subtle clunks from the suspension bushes or dampers, and check for any brake shudder or pulling to the side, which could indicate uneven pad wear or binding calipers. Finally, you must verify the service history to complement the clean MOT record. Ensure that time-based maintenance, such as brake fluid and coolant changes, has been performed according to the manufacturer's schedule, as these fluids degrade chemically regardless of mileage. Check for any evidence of minor fluid leaks around the engine or drivetrain and inspect the underside for any signs of early-stage corrosion on the exhaust or chassis components. For a vehicle of this complexity, confirming that all electronic driver assistance systems are operational is essential, as these are critical to the vehicle's modern safety profile.