2023 Renault Megane Techno EV Electric · PR12 LET

The vehicle most recently underwent its MOT test on 12 August 2026 and achieved a pass with no defects or advisories recorded. As this represents the first statutory inspection for a 2023 model, the maintenance trend is currently viewed as stable and the vehicle appears to have been kept in a condition that meets all legal roadworthiness standards without requiring immediate corrective action. With a recorded mileage of 24,118 miles over approximately three years, the vehicle has averaged roughly 8,039 miles per annum. This usage rate is considered typical for a modern electric vehicle and suggests a balanced duty cycle. There is no evidence of excessive mileage that would indicate premature wear of the drivetrain or suspension, nor is there evidence of prolonged standing which often leads to stagnant fluids or seized components. Despite the clean MOT record, a prospective buyer should conduct a thorough physical inspection of the consumables. Particular attention should be paid to the tyre tread depths and the condition of the sidewalls to ensure there is no uneven wear, which could indicate an alignment issue. Given the regenerative braking systems inherent to electric vehicles, the mechanical brake discs are used less frequently and can be prone to surface corrosion or binding calipers. During a test drive, listen for any grinding noises or feel for brake shudder, which would suggest the discs have degraded from lack of use. Further inspection should focus on the 12V auxiliary battery health and the verification of the service history. While electric vehicles have fewer moving parts, calendar-based maintenance remains critical, specifically the replacement of brake fluid and the inspection of cabin and pollen filters. Check the suspension bushes and coil springs for any signs of leakage or perishment, and ensure the charging port and cable locks operate smoothly. Verifying the service book stamps will confirm that the manufacturer recommended intervals have been adhered to, ensuring the long term integrity of the high voltage system and chassis.