2022 CAN-AM Traxter 1.0L Petrol · PX22 AAZ

The most recent MOT inspection conducted on 2 June 2026 resulted in a pass with no recorded defects. Evaluating the overall maintenance trend, the vehicle appears to be in a stable condition. The only failure recorded in the history occurred in June 2025 and was for a non-mechanical, administrative issue regarding a missing front registration plate. The fact that the vehicle subsequently passed with no defects suggests that the mechanical integrity and general upkeep have been maintained to a satisfactory standard. The recorded mileage of 31,486 miles over approximately four years indicates an average annual usage of roughly 7,872 miles. This is a typical usage profile for a vehicle of this age, suggesting it has been used regularly rather than sitting idle for long periods. While regular use is beneficial for preventing the seizure of components and the degradation of seals, the accumulated mileage means that consumables such as tyres, brake pads, and suspension components will have experienced meaningful wear. You should prepare for the possibility of upcoming maintenance requirements for these wear-and-tear items. Given the clean MOT record, your inspection should focus on physical wear that may not yet have reached a failure threshold. Examine the tyres thoroughly for even wear patterns and check the sidewalls for any signs of perishing or cracking. During a test drive, listen for any clunks or knocks from the suspension, which could indicate worn bushes or failing dampers, and check for any brake shudder or pulling to one side that might suggest warped discs or binding calipers. It is also important to check the steering response for any excessive play or looseness. Finally, inspect the undercarriage for any evidence of fluid leaks from the engine, transmission, or hydraulic systems, and check the chassis for any signs of corrosion or structural damage. Because the vehicle has seen consistent use, you should verify that the service book contains regular stamps for oil and filter changes, as well as time-based fluid replacements like coolant and brake fluid. Additionally, test the 12V battery health and ensure all electrical connections and lighting systems are fully operational to ensure the vehicle is ready for immediate use.