2014 Fiat Panda 1.2L Diesel · RV64 FVU

The vehicle remains roadworthy following its most recent MOT on 2025-10-10, but the maintenance trend is clearly worsening. The brake discs on both front wheels were flagged as worn and pitted in back-to-back tests just one day apart, indicating either a persistent issue or a failure to address the problem promptly. The parking brake efficiency failure in the prior test, followed by a passing result after adjustment, suggests the fault was corrected, but the recurring brake disc wear points to an underlying mechanical or alignment issue that has not been resolved. The sump guard corrosion is a minor structural concern, but not critical for immediate safety. The mileage of 32,518 miles over 12 years equates to roughly 2,710 miles annually, which is low for a vehicle of this age. The gap between the 2023-10-09 test at 26,001 miles and the 2024-09-19 test at 29,042 miles shows a relatively slow accumulation of 3,041 miles over 11 months, consistent with light use. The 2025-10-09 test at 32,517 miles and the 2025-10-10 test at 32,518 miles indicate no meaningful mileage change between tests, suggesting the vehicle was stationary or driven minimally during that period. This low usage pattern may explain the lack of major wear on tires or suspension, but also raises questions about whether the brakes were neglected during long periods of inactivity. Buyers should inspect the front brake system in detail, particularly the calipers and pads, as the repeated disc wear suggests either uneven pad wear, binding calipers, or misalignment. The parking brake efficiency issue, though resolved, warrants checking the cable tension and lever travel to ensure it remains within spec. The corroded sump guard is not a safety-critical defect, but it may indicate a broader susceptibility to rust, especially around the front underbody. Suspension bushes and coil springs should be checked for wear, as low mileage doesn’t guarantee their condition, and brake disc wear often correlates with suspension geometry changes. A thorough mechanical inspection by a qualified technician is strongly advised before purchase.