2017 Volkswagen Golf 2.0L Petrol · S7 HAA

The vehicle holds a current MOT certificate valid until March 2026, reflecting a stable maintenance trajectory following earlier tyre-related advisories. The most recent test at 55,518 miles returned a clean pass with zero recorded defects, indicating the seller has addressed previous wear items. Earlier records show a clear progression from nearside and offside front inner tyre wear warnings in March 2023 to a concrete failure just twelve months later when tread depths dropped below the legal threshold and edge wear became pronounced. The subsequent pass at the identical mileage reading confirms prompt component replacement rather than deferred upkeep. The trend has since stabilised, with the tester noting only isolated rear impact damage last year before clearing all checks this spring. Recorded usage aligns closely with the stated annual average of roughly six thousand miles. The odometer advanced 3,299 miles between the March 2023 and March 2024 tests, followed by increments of 2,667 and 2,248 miles respectively. These steady intervals rule out prolonged standing periods or aggressive motorway commuting that typically accelerates suspension bush degradation and brake disc scoring. The consistent twelve-month testing cycle also demonstrates regular servicing discipline, leaving no unexplained mileage gaps that might obscure hidden wear on timing components or differential seals. Prospective buyers should verify the condition of the front wheel alignment and steering rack internals, as persistent inner edge wear on the original tyres points to incorrect toe settings or worn track rod ends. A static check of the rear suspension mounting points and lower control arm bushes will confirm whether the noted nail puncture and tread damage resulted from standard road debris or underlying structural fatigue. Inspect the brake discs for uneven scoring around the wheel arches, particularly where the front tyres previously failed, and ensure the new rubber sits flush against the hubs without excessive runout. Confirm that any replaced suspension arms carry matching part numbers to avoid mismatched damping characteristics across the axle.