2007 Yamaha YZF R1 1.0L Petrol · SF07 RBY

The most recent MOT test conducted on 25 August 2026 resulted in a pass with no recorded defects. Evaluating the overall maintenance trend, the vehicle shows a positive trajectory. Although advisories were noted in 2023 regarding exhaust noise and in 2024 regarding rear tyre wear, the subsequent clean passes in 2026 suggest that these specific maintenance items have been rectified. This indicates a proactive approach to addressing consumable wear and mechanical noise, leading to a stable current roadworthiness status. The recorded mileage of 12,583 miles is exceptionally low for a 19-year-old vehicle, representing an annual average of approximately 662 miles. This usage profile suggests the motorcycle has been used sparingly or has undergone extended periods of storage. While this low mileage implies minimal wear on the engine internals, transmission, and drivetrain, it necessitates a cautious inspection of components that degrade through age and inactivity rather than through mechanical friction. Regarding the previous advisories, the buyer should pay close attention to the exhaust system during a test ride. Listen for any irregular rasping, popping, or excessive vibration that could indicate a loose exhaust manifold, a failing baffle, or a leak at the header joints. Although the tyre advisory was cleared, inspect the rear tyre for any signs of uneven wear patterns, which could indicate issues with chain tension or rear suspension geometry. Ensure the braking system feels consistent and that there is no evidence of binding calipers, which can occur if the motorcycle has been stationary for long periods. Due to the low mileage and age, physical inspection of rubber and fluid components is critical. Check the tyres for sidewall cracking or perishing, as aged rubber loses its grip and structural integrity regardless of tread depth. Inspect the drive chain for signs of corrosion, stiff links, or seizing caused by standing. Furthermore, verify that time-based maintenance has been performed, specifically regarding the replacement of brake fluid and coolant to prevent moisture contamination and internal corrosion. It is also advisable to check the 12V battery health and inspect the fuel system for any signs of degradation or varnish resulting from long-term storage of old fuel.