2012 Peugeot Premiers Partner 1.6L Diesel · SF12 AAO

The most recent MOT test for the 2012 Peugeot Partner, conducted on 2024-10-16, resulted in a clean pass with no recorded defects, marking a positive outcome following a period of recurring advisories. However, the vehicle’s MOT history reveals a pattern of wear-related issues, particularly in tyres, brakes, and the drive train, which persisted through three prior tests. The advisories from 2023-11-23—including nearside front tyre wear approaching the legal limit, rear brake pad thinning, and a deteriorated constant velocity (CV) joint boot—suggest ongoing mechanical stress that may have been mitigated but not fully resolved. While the 2022 and 2021 MOTs were also clean, the presence of these persistent advisories indicates either a lack of timely maintenance or underlying wear progression that could escalate if ignored. The vehicle’s overall maintenance trend appears stable in terms of passing MOTs, but the advisories underscore the need for proactive intervention to prevent further deterioration of critical components. The recorded mileage of 188,068 miles for a 14-year-old Peugeot Partner reflects a high annual usage rate of approximately 13,433 miles per year, which is notably elevated for its age. Such mileage accumulation typically accelerates wear on consumables like brake pads, tyres, and suspension components, as well as potential stress on drivetrain elements such as the CV joints and drive shafts. The absence of significant mileage gaps suggests the vehicle has been in active service, likely under conditions that contribute to faster degradation of wear items. While lower mileage could indicate lighter use or prolonged periods of inactivity, the current mileage profile implies a higher likelihood of wear-related failures, particularly in areas prone to friction and mechanical movement. Buyers should be cognisant of this usage pattern when assessing the vehicle’s long-term reliability. Given the recurring advisories and high mileage, the prospective buyer should conduct a thorough mechanical inspection to address the identified issues and mitigate further risk. The nearside front tyre wear approaching the legal limit warrants immediate attention, as excessive edge wear can indicate alignment or suspension misalignment, leading to uneven tyre wear, reduced traction, and potential handling instability. On a test drive, listen for unusual noises from the front wheels, such as clunking or uneven suspension movement, which may signal loose or worn suspension components. The rear brake pads being thin suggest significant friction surface loss, which could compromise braking performance and increase the risk of failure. Inspect the brake discs for scoring, warping, or corrosion, and check for a binding or grinding sensation when braking, which could indicate caliper issues or warped discs. Additionally, the severely deteriorated CV joint boot from 2023’s MOT highlights a critical failure point; inspect the boot for leaks, oil contamination, or excessive play in the joint, as a ruptured boot can lead to catastrophic drivetrain failure. Listen for whining or clicking noises from the rear axle during acceleration or cornering, and check for fluid leaks around the CV joints. For the 12V battery, given the vehicle’s age and high mileage, test its charge capacity and terminal corrosion, as both can lead to poor starting performance or electrical system failures. The brake system should be thoroughly inspected for corrosion on the discs, particularly if the vehicle has been stored or used in damp conditions, as rust can cause binding calipers or reduced braking efficiency. Check the brake fluid level and condition, as old fluid can absorb moisture, reducing braking effectiveness and risking hydraulic failure. The suspension components, including coil springs, shock absorbers, and suspension bushes, should be examined for signs of wear or failure, such as excessive play, clunking noises during cornering, or uneven tyre wear patterns. Finally, verify that the vehicle’s service history includes scheduled fluid top-ups, particularly for the engine oil, coolant, and brake fluid, as these fluids degrade over time and can lead to catastrophic failures if neglected. Given the advisories and usage profile, a comprehensive inspection by a qualified mechanic is strongly recommended to address the identified issues before purchase.