2006 Ford Focus C-MAX 1.6L Petrol · SH55 THV

The most recent MOT test on July 24, 2024, confirms the vehicle passed without any recorded defects, though it follows a failed test just two days prior at the same mileage (151,310). This back-to-back retest pattern suggests either a minor procedural oversight or a temporary issue resolved swiftly, as no defects were logged in either instance. The preceding tests from August 2023 also show identical pass/fail dates and mileages (133,072), indicating a consistent but unusual retest scenario. Overall, the trend is stable with no evidence of worsening mechanical issues, though the lack of defects in any test does not preclude underlying wear—particularly in high-mileage components like suspension bushes or drivetrain joints. The recorded mileage of 151,312 miles over 20 years reflects an average of approximately 7,566 miles per annum, which is typical for a vehicle of this age. The gap between tests—around 12 months—is standard, though the retests in 2023 and 2024 at identical mileages are notable. This suggests either a delayed booking or a brief period of inactivity before the vehicle was re-tested. There is no evidence of rapid mileage accumulation or prolonged periods of disuse, which could have accelerated wear on consumables like tyres or brake pads. Given the absence of recorded defects, a buyer should prioritise an in-person inspection of suspension components, particularly the rear suspension bushes and coil springs, which are common failure points in high-mileage vehicles. The brakes, while not flagged in MOTs, should be checked for uneven wear or binding calipers, especially if the vehicle has experienced sudden stops or heavy loads. Corrosion in wheel arches, sills, or the subframe is also critical to assess, as structural integrity degrades more rapidly in older models. Finally, the exhaust system should be examined for leaks or excessive rust, as emissions-related failures are often silent until advanced. The lack of advisories in the MOT history does not guarantee these areas are intact, so visual and functional checks are essential.