2022 Volkswagen Tiguan Active TSI 1.5L Petrol · ST20 NGT

The most recent MOT test conducted on 22 December 2025 resulted in a pass with no defects recorded. This follows a previous clean pass on 19 March 2025, indicating a highly stable maintenance trend. The absence of any advisories or failures across these tests suggests that the vehicle has been kept in good mechanical order and continues to meet the required DVSA roadworthiness standards without any immediate concerns regarding structural integrity or safety components. The vehicle has accumulated 50,338 miles over approximately four years, averaging roughly 12,584 miles per annum. This usage rate is relatively high for this vehicle class, suggesting a life of frequent use, likely involving longer commutes or motorway journeys. While high mileage can lead to accelerated wear on consumables and drivetrain components, it often avoids the issues associated with long periods of standing, such as binding calipers or perished seals. However, the buyer should be mindful that the vehicle is further along its wear cycle regarding suspension and braking systems than a lower-mileage example. As the MOT history is clean and devoid of specific defects, the physical inspection should focus on wear-and-tear items that may not yet have triggered an official advisory. Given the mileage, the buyer should closely examine the tyre treads for uneven wear, which could signal the need for wheel alignment or indicate worn suspension bushes. A thorough check of the brake discs for significant lip formation or scoring is recommended, as high usage often necessitates a replacement of both pads and discs. During a test drive, the buyer should listen for any clunks or knocks from the suspension over uneven road surfaces and ensure the gearbox operates smoothly without hesitation. Furthermore, it is essential to verify the service history to ensure that oil changes and filter replacements have been performed strictly according to the manufacturer's intervals, as high-mileage TSI engines are sensitive to fluid degradation. The buyer should inspect the engine bay for any signs of oil seepage around the seals and verify the health of the 12V battery. Finally, a check of the interior wear, specifically the driver's seat bolster and steering wheel, will help confirm that the cabin condition is consistent with the recorded mileage.