2022 MINI Cooper S Electric Level 2 Electric · ST22 AAJ

A consistent record of clean roadworthiness defines this vehicle, with the two most recent MOT inspections on 03 April 2026 and 07 April 2025 showing no recorded defects or advisories. This lack of flagged issues across both tests indicates that the essential safety components, including braking systems, lighting, and steering, have met the required standards without any noted deterioration or immediate repair requirements at the time of testing. The usage profile is characterised by significantly low annual mileage, with only 11,411 miles recorded over approximately four years of operation. This equates to an average of roughly 2,853 miles per year, which is well below typical UK driving averages. From a mechanical perspective, such low usage suggests minimal wear on high-friction components like brake pads and discs, as well as less frequent stress on suspension bushes and steering linkages. However, it also means the vehicle has spent a greater proportion of its life in a low-use state, which can sometimes lead to less frequent engagement of certain mechanical systems compared to a high-mileage vehicle. Because the MOT history contains no advisories regarding suspension, braking, or structural integrity, there are no specific mechanical defects to investigate based on previous test results. On a test drive, focus should remain on verifying that the absence of recorded issues translates to real-world performance. Listen for any unusual knocks or rattles when traversing uneven surfaces, which would indicate wear in the suspension components or bushings that may not have been caught during a stationary inspection. Additionally, monitor the brake pedal feel for any sponginess or pulsation during deceleration to ensure the hydraulic system and discs are performing as expected. Given the low mileage, check for any signs of uneven tyre wear or slight pulling to one side, which can sometimes occur when a vehicle is driven infrequently. Pay close attention to the smoothness of the electric drivetrain and any regenerative braking transitions to ensure the vehicle operates without hesitation or abnormal noise.