2021 Keeway K-Light 125 E5 0.1L Petrol · SY71 ATF

An exceptionally low usage profile defines this vehicle, with the most recent MOT pass on 30 April 2026 showing no recorded defects. The testing history across the two recorded entries in 2024 and 2026 remains consistently clean, indicating that the vehicle has met the minimum structural and mechanical requirements for roadworthiness without any flagged failures or advisories during these specific inspections. The recorded mileage of just 364 miles over a five-year period represents an average annual accumulation of approximately 73 miles. This extremely low level of operation suggests the vehicle has spent the vast majority of its life stationary rather than in regular service. While this results in minimal wear on mechanical components such as the drivetrain, brake pads, and tyres, such a pattern of infrequent use can often lead to the degradation of rubber seals, gaskets, and fluid properties due to prolonged periods of inactivity. Given the lack of specific defects or advisories in the DVSA records, there are no documented issues with suspension bushes, brake lines, or exhaust systems to report. However, because the mileage is so low for a 2021 model, a prospective buyer should focus their physical inspection on components that can degrade through lack of movement. During a test ride, pay close attention to the smoothness of the throttle response and the engagement of the clutch to ensure no sticking or slipping has occurred due to long-term standing. Check for any signs of fluid weeping around the engine casings or fork seals, as stationary vehicles can develop leaks when seals dry out. Listen for any unusual clicking or grinding from the drivetrain or wheel bearings, which might indicate that internal components have been subject to moisture ingress or lack of lubrication during periods of inactivity. Ensure the braking system provides consistent pressure without any sponginess or sudden grabbing, which would indicate potential issues with the hydraulic system or fluid quality.