1999 Ford Focus 1.6L Petrol · T682 ALO

The 1999 Ford Focus currently holds a failed MOT status from the 24 April 2025 test at 176,211 miles, with the DVSA record showing no defects logged against that failure. The maintenance trend is neither clearly stable nor worsening on paper, as the vehicle passed cleanly in April 2024 at 172,539 miles yet failed twice previously within days of tests in April 2023 and April 2024 with no recorded defects. These repeated failures without listed faults suggest administrative or presentation issues at test rather than resolved mechanical defects, but the latest 2025 failure remains unexplained and requires clarification before any roadworthiness assumption. The recorded mileage of 176,211 over roughly 27 years equates to about 6,526 miles per year, which is typical for a car of this age. The gaps between tests show low annual use: only 3,672 miles accrued between the April 2023 pass and April 2024 pass, and just 3,672 miles again to the 2025 failure. The MOT history is sparse, with no advisories or defects ever captured across the five entries, which limits any data-led judgement on consumable wear or structural condition for a vehicle now over a quarter century old. A buyer must inspect the car in person given the unexplained April 2025 failure and the two prior short-interval failures in 2023 and 2024. Particular attention should go to structural integrity and corrosion on sills, subframes, and suspension mounting points, as 1999-era Ford monocoques commonly suffer unseen rust. The braking system, coil springs, suspension bushes, and exhaust emissions should be physically tested, since the absence of recorded defects does not confirm sound condition on a 176,000-mile example. Given the most recent test is over fourteen months old relative to today's date and ended in failure, the vehicle is not legally roadworthy without a fresh pass. The clean but erratic record implies previous owners may have presented the car late or incompletely rather than maintaining it to a documented standard, so a pre-purchase inspection by a qualified mechanic is essential before purchase.