2013 Ford Fiesta 1.0L Petrol · V7 MFG

The vehicle is currently roadworthy, but the maintenance history indicates a reactive rather than proactive approach to repairs. The most recent test on 17 June 2025 at 82,433 miles passed after an initial failure for incorrect headlamp aim. While the car met the minimum legal standards, the presence of structural corrosion and fluid leaks suggests the vehicle is entering a phase where age-related degradation is accelerating. The trend shows that faults are being addressed only once they result in a test failure. At 82,433 miles over 13 years, the Fiesta averages approximately 6,300 miles per year, which aligns with typical low-to-moderate usage patterns. The mileage progression shows consistent use, with roughly 4,500 miles covered between August 2023 and June 2024, and another 4,500 miles in the following year. This low annual mileage reduces mechanical wear on the drivetrain, but it often accelerates the degradation of rubber components and metal due to oxidation, which is evident in the recorded defects. A buyer must closely inspect the front sub-frame to assess the extent of the corrosion noted in the June 2025 test. Although the tester marked it as not seriously weakened, rust on these structural components tends to progress rapidly if left untreated. You should also verify the front suspension arm arms and ball joints, as the 2024 failure revealed excessive wear and compromised dust covers in that area. The gearbox oil leak reported in the most recent test requires a physical inspection to determine the source; even non-excessive leaks require monitoring to prevent catastrophic failure. The record from 2025 also flagged perishing and cracking on both rear tyres, indicating the rubber is aging out due to time rather than tread depth. These should be checked for sidewall cracks before purchase. Given the history of worn rear axle bushes noted in 2023, a road test to check for steering wander or rear knocking noises is advisable to ensure the suspension geometry remains stable and does not require immediate, costly replacement.