2006 Toyota Hilux 2.5L Diesel · W5 RAT

Corrosion on the rear body mounting is the primary mechanical concern for this vehicle, as evidenced by the advisory issued during the most recent MOT test on 04 August 2026. While the offside rear body mounting fixing was noted as insecure, the inspector recorded that the overall security was not significantly reduced, though the mounting itself is corroded. This failure and subsequent pass in August 2026 also involved several lighting and tyre defects, specifically a non-functioning nearside front direction indicator, incorrect headlamp aim on both sides, and a nearside front tyre not fitted in accordance with sidewall instructions. The recorded mileage of 113,917 miles is notably low for a 2006 vehicle, averaging approximately 5,696 miles per year over its twenty-year lifespan. This usage pattern suggests the vehicle has not been subjected to high-frequency long-distance driving, which can sometimes mean components like suspension bushes, drivetrain mounts, and braking systems have experienced less cumulative wear than a higher-mileage equivalent. However, such low annual accumulation can also indicate periods where the vehicle has been stationary, which may contribute to the localized corrosion observed on the body mountings. A prospective buyer should pay close attention to the structural integrity of the chassis and body mountings during a physical inspection. Given the advisory regarding the insecure and corroded offside rear body mounting, it is essential to examine the surrounding area for signs of spreading oxidation or thinning metal. On a test drive, listen for any unusual creaks, knocks, or structural groans when traversing uneven surfaces or when the vehicle is under load, as these can be symptoms of compromised mounting points or weakened structural connections. The recent lighting failures also necessitate a thorough check of the electrical system and headlight alignment. Verify that all indicators, including the nearside front, operate with consistent brightness and that the headlamp beams are correctly levelled and aimed to avoid glare or poor visibility. Additionally, ensure that all tyres, particularly the nearside front, are correctly sized and fitted according to manufacturer specifications to avoid any further compliance issues. Any pulling to one side or vibration through the steering wheel should be investigated to ensure the low mileage has not masked issues related to tyre fitment or wheel alignment.