2025 BYD Seal Excellence EV AWD Electric · WD75 SWU

The DVSA records show no MOT history for this 2025 BYD Seal Excellence EV AWD, meaning there is no official test result to reference. With the absence of any documented inspections, it is impossible to assess whether the vehicle’s maintenance pattern is stable, deteriorating or improving; the buyer should treat the lack of data as a risk factor and seek independent verification of the car’s service history. Mileage for the vehicle is not disclosed, so no comparison can be made between distance travelled and the one‑year age of the car. A typical 2025 model would be expected to have accumulated between five and ten thousand miles if used as a primary family vehicle, whereas a figure well below that could indicate limited use or prolonged storage. Without mileage data the buyer cannot gauge wear on high‑stress components such as the electric drivetrain, suspension bushings or brake rotors, and must therefore rely on a thorough physical inspection to infer the vehicle’s actual usage level. Given the likely low or uncertain mileage, the buyer should focus on age‑related deterioration. Examine the tyre sidewalls for cracking, dry rot or uneven wear that can develop even on unused tyres, and verify that the tyre tread depth meets legal limits. Inspect the battery pack and 12‑volt auxiliary battery for signs of swelling, corrosion on terminals or any warning lights on the instrument cluster; a battery health check with a qualified EV service centre is advisable to confirm capacity and cooling system integrity. Check the under‑carriage for corrosion on the chassis, suspension mounting points and brake caliper pins, especially if the car has been stored outdoors, and ensure that the brake discs are free from deep rust spots that could cause uneven pad contact. Finally, confirm that all scheduled time‑based services have been performed, such as coolant flushes for the inverter and motor, brake fluid replacement, and software updates to the vehicle’s battery management system. Look for a complete service book or electronic records showing that the manufacturer’s recommended inspections were carried out at the appropriate intervals. During a test drive, listen for any abnormal whine from the motor, vibration through the steering column, or irregular regenerative braking feel, and verify that all electronic safety systems—including autonomous emergency braking and lane‑keeping assist—activate correctly. These checks will help mitigate the uncertainty created by the missing MOT and mileage information and give a clearer picture of the car’s roadworthiness.