2022 Toyota C-HR 1.8L Hybrid electric (clean) · WH22 COU

The vehicle most recently passed its MOT on 26 June 2026 with no defects recorded. Looking back at the previous test from July 2025, which also resulted in a clean pass, the maintenance trend is exceptionally stable. The absence of any advisories over the last two years indicates that the vehicle has been kept in a condition that exceeds the minimum legal requirements for roadworthiness, showing no signs of premature wear or neglected maintenance. The recorded mileage of 7,538 miles is remarkably low for a vehicle of this age, averaging approximately 1,884 miles per year. While this suggests minimal mechanical stress on the engine, gearbox, and drivetrain, such low usage often implies the vehicle has spent significant periods stationary. This pattern of use shifts the primary mechanical concern from wear-and-tear to degradation caused by inactivity, which can affect various rubber and fluid-based components. Given the low mileage and clean MOT history, a physical inspection should focus on age-related perishing rather than tread depth. You must carefully examine the tyre sidewalls for fine cracking or dry rot, as tyres can degrade and lose structural integrity over time even if the tread remains deep. Additionally, check the brake discs for surface corrosion or pitting, and during the test drive, listen for any sticking or binding calipers that may have developed from prolonged standing, which can cause uneven braking or overheating. Attention must also be paid to the vehicle's electrical and fluid health. The 12V battery should be tested for its current state of health, as infrequent use or long periods of dormancy can lead to premature failure. Furthermore, verify the service history to ensure that oil and brake fluid changes have been performed according to the manufacturer's calendar intervals rather than mileage milestones, as these fluids degrade chemically over time. Finally, inspect the suspension bushes for any signs of stiffness or cracking to ensure the chassis remains supple.