2014 Fiat Doblo 1.2L Diesel · WM14 XKF

The latest MOT test conducted on 28 October 2025 resulted in a pass with no defects recorded. The overall maintenance trend for this vehicle is exceptionally stable, as the DVSA history shows a consistent string of clean passes without a single advisory or failure dating back to 2019. This suggests a vehicle that has been meticulously maintained or has experienced very little mechanical stress over its operational life. The recorded mileage of 52,568 miles is significantly low for a twelve year old vehicle, averaging approximately 4,381 miles per year. While this indicates minimal wear on the engine and drivetrain, such low annual usage often suggests the vehicle has been used for short trips or has spent extended periods stationary. This usage profile can introduce specific mechanical risks that are not always evident during a standard MOT inspection, particularly regarding the degradation of rubber components and the accumulation of moisture in fluids. Given the clean MOT record, your physical inspection should focus on the effects of age and standing. Carefully examine the tyre sidewalls for signs of perishing or hairline cracking, as tyres can lose their structural integrity over time even if the tread depth remains well above the legal limit. You should also inspect the brake discs for heavy surface corrosion and ensure there is no evidence of binding calipers, which is a common occurrence in low-mileage vehicles. During the test drive, listen for any suspension clunks or stiffness, as rubber bushes can dry out and crack regardless of the mileage covered. It is essential to verify the service history to ensure that maintenance has been carried out according to calendar intervals rather than mileage alone. Check for evidence of regular oil changes and coolant flushes to prevent internal corrosion and sludge build-up. You should also verify the health of the 12V battery and check for any signs of terminal corrosion, as infrequent use often leads to premature battery failure. Finally, ensure that the brake fluid has been replaced recently, as it is hygroscopic and degrades over time, which can compromise braking efficiency.