2021 KTM 300 EXC SIX Days TPI 21 0.3L Petrol · WR70 JWP

The 2021 KTM 300 EXC SIX DAYS TPI presents a stable and highly reassuring maintenance trend, culminating in a clean pass on 30 December 2025 at 3,715 miles with zero defects recorded. This outcome indicates the motorcycle currently meets all required safety and environmental standards without any immediate mechanical concerns. The absence of advisories or failures across the documented history suggests consistent care and a lack of recurring faults, pointing to a machine that has been well-maintained rather than neglected. The mileage profile is exceptionally low for a five-year-old machine, averaging just 743 miles annually. Between the 2 January 2025 test at 3,471 miles and the 30 December 2025 test at 3,715 miles, the odometer advanced by a mere 244 miles. Such minimal accumulation suggests light recreational use or prolonged periods of inactivity. While low mileage inherently limits wear on braking components, suspension bushes, and drivetrain parts, it introduces a different set of preservation risks associated with long-term standing rather than active use. Given the sparse yet entirely clean MOT record, a prospective buyer should focus the physical inspection on the specific vulnerabilities of a low-mileage, rarely used machine. Verify the condition of the tyres, as shallow tread depth can mask dangerous perishing and cracking caused by age rather than wear. Inspect the fork seals and brake calipers for signs of seizing, which often occurs when a motorcycle sits stationary for extended periods. The TPI fuel injection system demands attention to ensure the two-stroke oil pump and injector nozzles have not suffered from stale fuel residue. Examine the frame welds, swingarm pivot, and linkage bearings for corrosion or lack of lubrication. Spoke tension should also be checked, as low-mileage off-road bikes often suffer from loose spokes if they were ridden hard infrequently. The MOT record confirms current compliance, but the physical inspection must confirm that inactivity has not degraded the rubber, fluids, or moving parts.