2015 Citroen C4 1.6L Diesel · WV15 CVD

The vehicle is currently roadworthy but the maintenance trend shows a pattern of reactive rather than proactive component replacement. The most recent MOT test conducted in December 2025 at 109,866 miles resulted in a pass despite several advisories regarding the front suspension and braking system. While the car meets the minimum standard, the presence of worn front suspension arm bushes and thinning brake discs indicates that these components are reaching the end of their service life and require imminent attention. At a recorded mileage of 109,866 miles over 11 years, the vehicle averages approximately 10,000 miles per annum. This aligns closely with national averages for a petrol family car. The data shows consistent usage, with roughly 11,000 miles covered between December 2023 and December 2024, and another 11,217 miles in the following year. This regularity suggests the vehicle has been used consistently, which explains the progressive wear on rubber components and mechanical hardware across the chassis. A physical inspection must focus heavily on the front end geometry. The December 2025 advisory noted worn suspension arm bushes while the 2024 failure identified a compromised anti-roll bar linkage dust cover. These issues often lead to steering vagueness and uneven tyre wear if left unaddressed. Furthermore, the front brake discs are now officially flagged as worn; a buyer should check the remaining thickness of the pads and ensure the discs are not scored or suffering from heavy pitting. The rear suspension also warrants scrutiny due to documented corrosion on both shock absorber casings reported in late 2024. While these did not cause a failure initially, external corrosion on shocks often precedes seal failure and leakage. The persistent oil leak noted in 2023 should also be monitored during a test drive to ensure it remains a minor seep rather than a developing fault from the engine or crank seal. The distorted nearside front inner wheel mentioned in the latest test should be checked for any vibrations at high speeds.