2001 Kawasaki ZX-12R 1.2L Petrol · Y927 ACV

The most recent MOT test on March 28, 2025, confirms the Kawasaki ZX-12R remains roadworthy with no defects recorded at 40,344 miles. The consistent pass history over the past four years—including a rare double test in April 2023 without failings—suggests the vehicle has been maintained at a baseline standard, though the absence of advisories or minor faults means critical components have not been scrutinised beyond MOT thresholds. The latest test was conducted just over four months ago, which is acceptable for a high-performance bike of this age, though the next MOT due date (March 2027) is approaching rapidly. No recurring failures or advisory notes indicate systemic neglect, but the lack of pre-MOT servicing records means potential wear—such as chain stretch, suspension damping, or throttle response degradation—cannot be confirmed. The recorded mileage of 40,344 miles over 25 years reflects an average of just 1,614 miles annually, which is unusually low for a sportbike of this era. The gap between tests—consistently around 12 months—shows no prolonged periods of inactivity, though the sudden doubling of mileage between April 2022 (35,071 miles) and March 2023 (37,277 miles) suggests a brief period of heavier use. This could imply recent ownership changes or seasonal riding patterns, but the overall low mileage reduces the likelihood of severe wear on high-stress components like brakes, suspension, or drivetrain. However, prolonged storage—even if not evident in the MOT history—could have contributed to issues like seized throttle bodies, degraded fuel lines, or corrosion in electrical contacts. Given the clean MOT record, a buyer should prioritise an in-person inspection of the chain and sprocket for excessive wear or stretch, as chain longevity is critical for performance and durability. The suspension—particularly the rear shocks and front forks—should be checked for oil leaks, damping responsiveness, and worn bushes, as high-performance bikes of this age often develop internal seal failures. Brake pads and discs should be measured for thickness, with attention to lateral run-out on discs, as repeated high-speed use could accelerate uneven wear. Finally, inspect the frame for stress cracks, particularly around the headstock and down tubes, and verify the electrical system for corrosion in connectors or intermittent faults, as these are common silent killers in older sportbikes. The absence of MOT advisories does not preclude these areas from requiring attention.