2008 BMW 116 1.6L Petrol · YB08 OBN

The vehicle currently holds a roadworthiness rating of Pass, but this rating is contingent upon the maintenance history of the most recent test. A single MOT failure in the April 2021 test at 99,979 miles indicates a critical structural or mechanical risk that has not been resolved, rendering the car's safety record invalid. While the 2022 and 2021 tests passed, the 2021 failure suggests that previous owners may have been careless, leading to a pattern of recurring faults rather than a stable, improving trend. The lack of a 2020 test result means the specific wear pattern for that year is unknown, but the absence of a 2022 test result confirms that the most recent failure occurred well before the current testing date. The mileage pattern is characterized by significant accumulation over the last two years, despite the vehicle being approximately 18 years old. The 105,436 miles recorded for the most recent test fall within a very narrow window, indicating that the vehicle has not undergone significant wear on the drivetrain or suspension since the April 2021 inspection. This rapid mileage gain suggests that the owner may have maintained a low mileage range, which could imply that basic upkeep was skipped or that the vehicle was driven in conditions that minimize wear. The gap between the 2021 and 2022 tests, which occurred in the same month, suggests that the vehicle was likely driven on a schedule that resulted in consistent mileage accumulation rather than a gradual wear pattern. To assess the current risk, the buyer must inspect the vehicle for structural integrity and mechanical wear that could have been exacerbated by the recent mileage. The most critical findings are the binding rear brakes and the suspension bushes, which have been flagged multiple times in the history. These components are prone to corrosion and binding, especially if the vehicle has been driven in wet conditions or if the brakes have been serviced improperly. Given the history of a failed MOT, the buyer must be prepared to perform a full roadworthiness check at the dealer to verify that the brake pads and discs have not degraded to a dangerous state. The buyer should also verify that the exhaust emissions have been tested and that the tyres have adequate tread depth, as the lack of a 2020 test result means the specific tread condition for that year is not known.