2010 Peugeot Expert HDI SWB 1.6L Heavy oil · YKZ 6002

High-mileage usage defines the mechanical profile of this Peugeot Expert, with the most recent MOT passed on 2022-07-20 showing no recorded defects. While the single recorded test result indicates a momentary state of compliance, the absence of a continuous testing history makes it difficult to establish a long-term trend regarding the deterioration of wear-and-tear components or the progression of structural corrosion. The vehicle has covered 289,772 miles over its sixteen-year lifespan, representing an average annual accumulation of approximately 18,111 miles. This level of usage is high for a vehicle of this age and suggests consistent, heavy-duty operation. Mechanically, this high mileage increases the likelihood of advanced wear across the entire drivetrain, including the turbocharger, fuel injection system, and clutch assembly, as well as accelerated degradation of rubber components such as suspension bushes and engine mounts. Given the high mileage and the gap in recorded testing data, a physical inspection must focus on the integrity of the chassis and the condition of the suspension system. You should check for signs of significant corrosion on the subframes and sills, which are common failure points on older commercial vehicles. During a test drive, pay close attention to any knocking or clunking sounds when traversing uneven surfaces, which could indicate worn shock absorbers or perished suspension linkages, and listen for any irregular idling or heavy diesel combustion noises that might signal injector or fuel system issues. Braking and steering components require particular scrutiny due to the cumulative mileage. Test the vehicle for any steering pull or vibrations through the steering wheel, which may indicate worn ball joints or tie-rod ends. Additionally, monitor the brake pedal for any sponginess or pulsation during deceleration, which could point to worn discs or binding calipers. Because the last recorded test was in 2022, it is essential to verify that all consumables and safety-critical items have been addressed since that period.