2017 Mazda 3 2.0L Petrol · YN17 SNY

A consistent track record of roadworthiness defines this vehicle, with the most recent test on 2026-09-04 resulting in a pass with no defects. This follows a trend of three consecutive years of clean passes, indicating a stable mechanical state since 2023. The only notable anomalies in the history occurred in 2022, when the vehicle passed but carried several advisories regarding tyre condition. The recorded mileage of 103,546 miles over approximately nine years represents a typical annual accumulation of roughly 11,505 miles. This usage pattern means the vehicle has experienced standard wear on its drivetrain and chassis components. At this mileage, the focus of an inspection should move toward the longevity of consumables and the integrity of suspension elements that are subject to high-cycle fatigue. Guidance for a physical inspection should be rooted in the 2022 advisories, which flagged worn edges on both front tyres and perishing or cracking on the sidewalls of the rear tyres. While these issues were not present in later tests, the buyer should examine the current tyres for any remaining uneven wear or sidewall cracking. During a test drive, any steering pull or instability may indicate that the alignment or suspension issues that contributed to the previous tyre wear have not been fully addressed. Although the recent records are clear of structural failures, the mileage warrants a close check for any knocks or clunks when driving over speed bumps or uneven road surfaces, which would signal wear in the suspension bushes or coil springs. It is also recommended to feel for any pedal judder or binding during braking to ensure the calipers and discs are functioning correctly, as these components are subject to natural wear at this stage of the vehicle's life.