2018 Volvo XC90 2.0L Diesel · YN18 LBX

The latest MOT test for the 2018 Volvo X90 was completed on 2025-08-30 and resulted in a PASS, indicating that the vehicle met all regulatory standards at that time. Reviewing the recent history reveals a consistent pattern of passing tests over the past three years, with no recorded defects or advisories. This suggests a stable maintenance trend, which is generally favorable for long-term reliability. However, the vehicle has accumulated a substantial mileage of 63,927 miles, which corresponds to approximately 7,991 miles per year—aligning with the typical usage for a car of its age. While this mileage is within an acceptable range, it does point to moderate wear on components such as the suspension, brakes, and drivetrain, especially if the vehicle has been left stationary for extended periods. The recorded mileage, though not excessively high, warrants attention given the vehicle's age and usage profile. At 8 years and 63,927 miles, the wear on critical systems like the brake discs, coil springs, and exhaust components should be monitored closely. The absence of any recent issues in the MOT history is reassuring, but it does not negate the need for proactive inspections. During a test drive, prospective buyers should pay particular attention to any unusual noises, such as clunking from suspension bushes or grinding from worn calipers. Additionally, the tyre sidewalls should be inspected for cracking or perishing, as this is a common failure point at this stage of the vehicle's life. For buyers who have not yet had the vehicle serviced, it is essential to verify that all service bookmarks are present and that fluid levels are adequate. The 12V battery should be checked for corrosion and proper charge retention, while brake fluid levels and condition must be assessed. Since the vehicle has a calendar-based service history, ensuring that maintenance intervals are followed will help mitigate the risk of unexpected failures. Overall, while the MOT record is clean and the vehicle has maintained good standards, a thorough pre-purchase inspection focusing on wear indicators and component integrity is strongly advised to safeguard against future issues.