2007 Bentley Azure 6.8L Petrol · 1 DSJ

A five‑year streak of clean MOT results indicates that, at least at the time of testing, the 2007 Bentley Azure has met the statutory safety and emissions standards without recorded defects, with the latest pass recorded on 2 September 2026. The absence of advisories or failures across consecutive annual tests suggests no recurring mechanical issues have been identified by the DVSA during this period. Recorded at 13 768 miles after 19 years of existence, the vehicle averages roughly 725 miles per annum, a mileage level that is markedly below typical usage for a luxury saloon of this age. Such low utilisation often points to extended periods of limited running, which can allow age‑related deterioration of rubber components, seals and electronic systems even where wear from distance is minimal. Prospective buyers should be aware that mileage alone does not guarantee the condition of wear items such as suspension bushings, brake pads or tyre tread, which can degrade over time irrespective of distance covered. Given the clean MOT history, there are no specific components flagged for immediate concern, but a prudent inspection should still focus on age‑sensitive areas. On a test drive, listen for any clunking or knocking over bumps that could reveal worn suspension bushings or deteriorated ball joints, and monitor steering for any pull to one side that might indicate subtle alignment or subframe corrosion. While braking performance was not noted as deficient, verify that the pedal feels firm, that there is no pulsation under hard application, and that there is no audible squeal or grinding that could hint at pad or disc wear not captured in the MOT. Finally, examine the condition of the tyres for cracking, uneven wear patterns or dry rot, and inspect the under‑carriage for rust, especially around the chassis rails and rear subframe, which are common on vehicles of this vintage. Check for any visible fluid leaks around the engine bay, coolant hoses and brake lines, and ensure that all lights, indicators and the exhaust system operate correctly. A thorough visual and road test, complemented by a professional pre‑purchase inspection, will help confirm that the vehicle’s mechanical state aligns with the spotless MOT record.