IsItAGoodCar
UK Buyer Reliability Guide3 Known Faults Documented

MG GS Common Problems & Reliability

The MG GS, unveiled at the London Motor Show in May 2016 and launched in June 2016, holds historic significance as MG Motor's first-ever venture into the booming SUV market. Developed on a bespoke crossover platform engineered with input from SAIC’s Longbridge technical team, the GS targeted the high-volume Nissan Qashqai, Renault Kadjar, and Kia Sportage segment by providing family-sized dimensions and generous equipment at the price point of a much smaller B-segment crossover. The UK lineup was exclusively front-wheel drive, powered by a 1.5-litre TGI direct-injection turbocharged petrol engine developing a punchy 166 PS and 250 Nm of torque co-developed with General Motors, paired with either a six-speed manual gearbox or an optional seven-speed dual-clutch transmission (DCT) in Explore, Excite, and top-tier Exclusive trims. While critics noted firm low-speed ride quality and utilitarian cabin plastics, the GS was widely praised for its commanding driving position, generous rear-passenger legroom, completely flat-folding rear load floor, and strong 1,750 kg braked towing capacity. On the UK used market, the GS represents exceptional family practicality per pound, offering an elevated driving position and modern crossover styling at supermini budget levels.

2
Generation Periods
3
Known Issues
0
Critical Faults
2
Moderate Issues

Select a Model Year Period

Detailed fault breakdown, symptoms, and estimated repair bills by production year.

Most Common MG GS Faults & Repair Costs

Moderate Risk

7-Speed Dual-Clutch Transmission (DCT) Low-Speed Shudder and Clutch Judder

Est. Cost£450–£1,400

The optional 7-speed dry dual-clutch automatic transmission exhibits noticeable clutch judder, hesitation, and jerky power delivery when crawling at low speeds in heavy UK urban traffic. Thermal build-up in stop-and-go driving accelerates clutch friction plate wear and glazes the clutch surfaces, leading to severe vibrations when pulling away from junctions or ascending moderate inclines until the TCU is updated or the clutch pack is replaced.

Warning Signs:

Shuddering and violent vibration when pulling away in first gear, Delayed throttle response and sudden surging at mini-roundabouts, Clutch overheat warning light illuminating during crawling traffic

What to Check Before Buying:
  • Drive the vehicle slowly at 2–5 mph in stop-start traffic to feel for transmission shudder
  • Check dealer service paperwork for dual-clutch fluid service and transmission software reflash history
Verified by IsItAGoodCar Research TeamUpdated
Moderate Risk

Rear Brake Caliper Slider Pin Corrosion and Pad Binding

Est. Cost£180–£450

The rear brake caliper guide pins and slide rails suffer from dirt ingress and corrosion caused by exposure to winter road salt in the UK. Seized guide pins prevent the brake pads from retracting cleanly from the brake discs, creating continuous drag, excessive rear wheel heat, accelerated pad wear, and an uneven braking balance that results in an MOT failure for brake imbalance or binding.

Warning Signs:

Hot rear alloy wheels and acrid burning smell after normal driving, Continuous high-pitched squealing from the rear axle while moving, Significant accumulation of black brake dust on rear alloy rims compared to front

What to Check Before Buying:
  • Check temperature of rear wheel hubs by hand immediately after the test drive
  • Inspect rear brake discs for circular scoring grooves, excessive lip, or blue heat marks
Verified by IsItAGoodCar Research TeamUpdated
Low Risk

Tailgate Boot Lock Actuator Failure and Remote Unlatching Fault

Est. Cost£120–£280

The electronic tailgate latch solenoid and exterior microswitch mechanism suffer from moisture ingress through the rear hatch handle gasket. Internal electrical corrosion causes the latch actuator to fail intermittently or permanently, preventing the boot from opening via the key fob remote or tailgate exterior release button, trapping cargo inside the luggage area until the actuator unit is dismantled and replaced.

Warning Signs:

Tailgate fails to release when pressing key fob boot button, Exterior boot release switch clicks repeatedly without unlocking latch, Boot open warning light illuminates on dashboard while tailgate is securely shut

What to Check Before Buying:
  • Operate tailgate release repeatedly using both the key fob remote and the handle switch
  • Inspect the boot lock striker plate and latch mechanism for rust or water stains
Verified by IsItAGoodCar Research TeamUpdated
Essential Pre-Purchase Step

Buying a used MG GS? Always check for hidden finance and write-off history.

Mechanical problems are only half the battle. Over 1 in 3 UK used cars checked have unpaid finance or accident write-off records that could cause you to lose the car or thousands in value.

Inspection Checklist for MG GS Buyers

On DCT automatic models, conduct a rigorous low-speed test drive in stop-start traffic to detect clutch shudder.
Inspect the rear brake discs and calipers after driving to ensure guide pins are not binding or dragging.
Operate the tailgate release switch and key fob remote multiple times to ensure the latch solenoid opens reliably.
Check front headlamp units for internal water droplet pooling or misting along the bottom LED reflector housing.
Verify that all annual service stamps are present in the service book to confirm scheduled oil and brake fluid changes.